Manettino dial

Information about Manettino dial

Manettino dials are a part of some modern Ferrari cars (like the new Ferrari 599 GTB and Ferrari F430). These adjustment dials are mounted on the steering wheel, usually just underneath the center of the wheel. They're inspired by the controls found on , but have a more polished appearance.

The dial allows for the quick and simple adjustment of the electronics governing suspension settings, traction control, electronic differential, and change speed of electronic gearbox.

A similar control system was employed on the Ferrari Enzo, but used individual buttons for different settings rather than a single rotary switch.

Enlarge picture
Ferrari F430 steering wheel with manettino switch

External links

Ferrari 599 GTB Fioramonti (internal code F139) is Ferrari's 2-seat Gran Turismo flagship model, replacing the 575M Maranello in 2006 as a 2007 model. The 599 GTB debuted at the Geneva Motor Show on February 28, 2006.
..... Click the link for more information.
Ferrari F430 is a high-performance sports car produced by the Italian automaker Ferrari to succeed the Ferrari 360. It debuted at the 2004 Paris Motor Show.[1] European left-hand drive sales began in November 2004, but right-hand drive sales did not start until Spring
..... Click the link for more information.
Enzo Ferrari is a 12-cylinder Ferrari supercar named after the company's founder, Enzo Ferrari. It is currently the most powerful naturally aspirated production car in the world.
..... Click the link for more information.
Automotive design is the profession involved in the development of motor vehicles or more specifically road vehicles. This most commonly refers to automobiles but also refers to motorcycles, trucks, buses, coaches, and vans.
..... Click the link for more information.
Coachwork is the body of a motor vehicle (automobile, bus or truck) which is built around a chassis, rather than being of monocoque construction. Another word is carrossery (plural: carosseries).
..... Click the link for more information.
chassis (plural: "chassis") (IPA: /ˈʃæːsiː, ˈtʃæːsiː/) consists of a framework that supports an inanimate object, analogous to an animal's skeleton, for example in a motor vehicle or a
..... Click the link for more information.
Body-on-frame is an automobile construction technology. Mounting a separate body to a rigid frame which supports the drivetrain was the original method of building automobiles, and its use continues to this day.
..... Click the link for more information.
A bumper is a part of an automobile designed to allow one vehicle to impact with another and to withstand that collision without severe damage to the vehicle's frame. Brush guards, push bars, etc.
..... Click the link for more information.
A cabrio coach or semi-convertible is a type of car that has a retractable textile roof, and derives from Cabriolet. It is an inexpensive alternative to a full convertible, especially on cars with unibody designs since little or no redesign of the body is necessary.
..... Click the link for more information.
chassis (plural: "chassis") (IPA: /ˈʃæːsiː, ˈtʃæːsiː/) consists of a framework that supports an inanimate object, analogous to an animal's skeleton, for example in a motor vehicle or a
..... Click the link for more information.
Continental tire is an upright, external, mounted spare tire behind an automobile's trunk compartment. This term also describes a completely fake design that is stamped into the trunk lid. It is a bulge that only suggests a spare tire.
..... Click the link for more information.
crumple zone of a vehicle such as a train or an automobile is a structural feature designed to compress during an accident to absorb energy from an impact. Typically, crumple zones are located in the front part of the vehicle, in order to absorb the impact of a head-on collision,
..... Click the link for more information.
Dagmar bumpers, also known simply as Dagmars (D-HAG-mar) is a slang term for the artillery shell shaped styling elements found on the front bumper/grille assemblies on several makes of cars produced in the 1950s, an era recognized for its flamboyant designs and
..... Click the link for more information.
The decklid (or deck lid) is the cover over the trunk/boot of motor vehicles that allows access to the main storage or luggage compartment. A hinge allows the decklid to be raised, while devices such as springs hold it up in the open position.
..... Click the link for more information.
Fender is the US English term for the part of an automobile, motorcycle or other vehicle body that frames a wheel well. In British English, the fender is called the wing
..... Click the link for more information.
Fender skirts, known in Australia as spats, are pieces of bodywork that cover the upper portions of the rear tires of an automobile. They are typically detachable to allow for tire changes.

They are implemented for both aesthetic and aerodynamic reasons.
..... Click the link for more information.
grille is an opening in the bodywork of a vehicle to allow air to enter. Most vehicles feature a grille at the front of the vehicle to allow air to flow over the radiator and cool the engine compartment.
..... Click the link for more information.
hood (North America) or bonnet (Commonwealth) is the hinged cover over the engine of motor vehicles that allows access to the engine compartment for maintenance and repair.
..... Click the link for more information.
hood scoop is an air vent on the hood of an automobile that either allows a flow of air to directly enter the engine compartment, or appears to do so. It may be closed, and thus purely decorative, or serve to enhance performance in several possible ways.
..... Click the link for more information.
Monocoque (French for "single" (mono) and "shell" (coque)) is a construction technique that supports structural load using an object's external skin. This stands in contrast with using an internal framework (or truss) that is then covered with a non-load-bearing skin.
..... Click the link for more information.
An A-pillar is a name applied by car stylists and enthusiasts to the shaft of material that supports the windshield (windscreen) on either of the windshield frame sides. By denoting this structural member as the A-pillar, and each successive vertical support in the greenhouse
..... Click the link for more information.
Pontoon fenders are a type of fender for an automobile. Unfortunately, two entirely different types of fender are defined by this term. The earlier American meaning did not reach all nations.
..... Click the link for more information.
On an automobile, a quarter panel is a body panel that covers the section between the door and the trunk. In most if not all countries, for example the United Kingdom and North America, the term is only used to refer to the rear panels.
..... Click the link for more information.
shaker scoop (sometimes, inaccurately, called a shaker hood scoop or a shaker hood) is an automobile term for an air intake for combustion air that is mounted directly on top of the engine's air cleaner and protrudes through a hole in the hood.
..... Click the link for more information.
spoiler is an aerodynamic device attached to an automobile whose intended design function is to 'spoil' unfavorable air movement across a body of a vehicle of some kind in motion.
..... Click the link for more information.
A subframe is a structural component of a vehicle, such as an automobile or an aircraft, that uses a discrete, separate structure within a larger body-on-frame or unit body to carry certain components, such as the engine, drivetrain, or suspension.
..... Click the link for more information.
Tonneau (pronounced ta’-no) in modern use describes a bed cover for a pickup truck. They can be hard or soft. Hard covers optionally hinge or fold.

Its original (now archaic) use was for an open rear passenger compartment on an automobile and, by extension, a body
..... Click the link for more information.
trunk on its rear trunk rack. These were integrated with the body in later models.]]

The trunk, or boot, of an automobile or car is the vehicle's main storage, luggage, or cargo compartment.
..... Click the link for more information.
hood (North America) or bonnet (Commonwealth) is the hinged cover over the engine of motor vehicles that allows access to the engine compartment for maintenance and repair.
..... Click the link for more information.
A car door is generally an opening to enter to the car (or their compartments or partition), often equipped with a hinged or sliding panel which can be moved to leave the opening accessible, or to close it more or less securely.
..... Click the link for more information.

This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.