motor controller

Information about motor controller

A motor controller is a device or group of devices that serves to govern in some predetermined manner the performance of an electric motor. A motor controller might include a manual or automatic means for starting and stopping the motor, selecting forward or reverse rotation, selecting and regulating the speed, regulating or limiting the torque, and protecting against overloads and faults.

Scope of motor controller applications

The scope of motor control technology must be very wide to accommodate the wide variety of motor applications.

Domestic applications

Electric motors are used domestically in personal care products, small and large appliances, and residential heating and cooling equipment. In most domestic applications, the motor controller functions are built into the product. In some cases, such as bathroom ventilation fans, the motor is controlled by a switch on the wall. Some appliances have provisions for controlling the speed of the motor. Built-in circuit breakers protect some appliance motors, but most are unprotected except that the household fuse or circuit breaker panel disconnects the motor if it fails.

Office equipment, medical equipment etc.

There is a wide variety of motorized office equipment such as personal computers, computer peripherals, copy machines and fax machines as well as smaller items such as electric pencil sharpeners. Motor controllers for these types of equipment are built into the equipment. Some quite sophisticated motor controllers are used to control the motors in computer disc drives. Medical equipment may include very sophisticated motor controllers.

Commercial applications

Commercial buildings have larger heating ventilation and air conditioning (HVAC) equipment than that found in individual residences. In addition, motors are used for elevators, escalators and other applications. In commercial applications, the motor control functions are sometimes built into the motor-driven equipment and sometimes installed separately.

Industrial applications

Many industrial applications are dependent upon motors (or machines), which range from the size of one's thumb to the size of a railroad locomotive. The motor controllers can be built into the driven equipment, installed separately, installed in an enclosure along with other machine control equipment or installed in motor control centers. Motor control centers are multi-compartment steel enclosures designed to enclose many motor controllers. It is also common for more than one motor controller to operate a number of motors in the same application. In this case the controllers communicate with each other so they can work the motors together as a team.

Vehicle applications

All types of engine-driven vehicles from automobiles, airplanes, aircraft carriers and agricultural equipment to zambonis may have electric motors to perform a variety of functions. In electric vehicles, diesel-electric vehicles, and hybrid vehicles, electric motors are used to propel the vehicle. The motor controllers in vehicle applications are integrated into the vehicle.

Power tools

Power tools such as drills, saws and sanders are widely used by home owners, hobbyists, construction and repair trades people, and industrial workers. Both portable and stationary power tools usually have built in motor controllers and often include an adjustable speed feature.

Hobby equipment

A variety of hobbies make use of specialized motorized equipment that is similar to domestic appliances or portable tools.

Radio controlled (R/C) models may include fairly sophisticated motor controllers. The motor controllers are ultimately built into the equipment, but the hobbyist may purchase the controller separately or construct it.

Robotics is another area in which the hobbyist may purchase a motor controller as a separate item or construct it.

Types of motor controllers

An electric motor controller can be classified by the type of motor it is to drive such as permanent magnet, servo, series, separately excited, and alternating current.

A motor controller is connected to a power source such as a battery pack or power supply, and control circuitry in the form of analog or digital input signals.

Controls for AC Induction Motors

Recent developments in drive electronics have allowed efficient and convenient speed control of these motors, where this has not traditionally been the case. The newest advancements allow for torque generation down to zero speed. This allows the polyphase AC induction motor to compete in areas where DC motors have long dominated, and present an advantage in robustness of design, cost, and reduced maintenance.

Variable Frequency Drives

Main article: Variable-frequency drive

Phase Vector Drives

Phase vector drives (or simply vector drives) are an improvement over vanilla VFD's in that they separate the calculations of magnetizing current and torque generating current. These quantities are represented by phase vectors, and are combined to produce the driving phase vector which in turn is decomposed into the driving components of the output stage. These calculations need a fast microprocessor, typically a DSP device.

Unlike a VFD, a vector drive is a closed loop system. It takes feedback on rotor position and phase currents. Rotor position can be obtained through an encoder, but is often sensed by the reverse EMF generated on the motor leads.

In some configurations, a vector drive may be able to generate full rated motor torque at zero speed.

Direct Torque Control Drives

Main article: Direct Torque Control

Brushed DC Motor Speed or Torque Controls

These controls are applicable to brushed DC motors with either a wound or permanent magnet stator. A valuable characteristic of these motors is that they are easily controlled in torque, the torque being fairly directly proportional to the driving current. Speed control is derived by simply modulating the motor torque.

SCR or Thyristor Drive

Main article: Thyristor drive
SCR controls for DC motors derive power from AC power, and send rectified voltage to the motor. These controls are very common in industry, running from line voltages, with motors rated at 90V for 120V line, and 180V for a 240V line. They are available in reversing and non-reversing models. They are robust, with a minimum of electronic components. The waveform sent to the motor will have strong harmonic components due to the switching at line frequency. This results in current and torque ripple, and an audible hum.

PWM or Chopper Drives

PWM controls use pulse width modulation to regulate the current sent to the motor. Unlike SCR controls which switch at line frequency, PWM controls produce smoother current at higher switching frequencies, typically between 1 and 20 kHz. At 20 kHz, the switching frequency is inaudible to humans, thereby eliminating the hum which switching at lower frequency produces. However some motor controllers for radio controlled models make use of the motor to produce audiable sound, most commonly simple beeps.

A PWM controller typically contains a large reservoir capacitor and an H-bridge arrangement of power transistors.

Servo Controllers

Servo controllers is a wide category of motor control. Common features are:
  • precise closed loop position control
  • fast acceleration rates
  • precise speed control
Servo motors may be made from several motor types, the most common being
  • brushed DC motor
  • brushless DC motors
  • AC servo motors
Servo controllers use position feedback to close the control loop. This is commonly implemented with encoders, resolvers, and Hall effect sensors to directly measure the rotor's position. Others measure the back EMF in the undriven coils to infer the rotor position, and therefore are often called "sensorless" controllers.

A servo may be controlled using pulse-width modulation (PWM). How long the pulse remains high (typically between 1 and 2 milliseconds) determines where the motor will try to position itself. Another control method is pulse and direction.

Stepper Motor Controllers

Main article: stepping motor
A stepper, or stepping, motor is a synchronous, brushless, high pole count, polyphase motor. Control is usually, but not exclusively, done open loop, ie. the rotor position is assumed to follow a controlled rotating field. Because of this, precise positioning with steppers is simpler and cheaper than closed loop controls.

Modern stepper controllers drive the motor with much higher voltages than the motor nameplate rated voltage, and limit current through chopping. The usual setup is to have a positioning controller, known as an indexer, sending step and direction pulses to a separate higher voltage drive circuit which is responsible for commutation and current limiting.

Relevant Circuits to Motor Control

H-bridge

Main article: H-bridge
DC motors are typically controlled by using a transistor configuration called an "H-bridge". This consists of a minimum of four mechanical or solid-state switches, such as two NPN and two PNP transistors. One NPN and one PNP transistor are activated at a time. Both NPN or PNP transistors can be activated to cause a short across the motor terminals, which can be useful for slowing down the motor from the back EMF it creates.

References

Software

See also

electric motor converts electrical energy into mechanical energy. The reverse process, that of converting mechanical energy into electrical energy, is accomplished by a generator or dynamo.
..... Click the link for more information.
Small appliance refers to a class of home appliances that are semi-portable or which are used on tabletops, countertops, or other platforms. Such items are contrasted with major appliances, which are typically fixtures that cannot be easily moved.
..... Click the link for more information.
Small appliance refers to a class of home appliances that are semi-portable or which are used on tabletops, countertops, or other platforms. Such items are contrasted with major appliances, which are typically fixtures that cannot be easily moved.
..... Click the link for more information.
A major appliance is usually defined as a large machine which accomplishes some routine housekeeping task, which includes purposes such as cooking, food preservation, or cleaning, whether in a household, institutional, commercial or industrial setting.
..... Click the link for more information.
HVAC may also stand for High-voltage alternating current
HVAC (pronounced either "H-V-A-C" or, occasionally, "aitch-vak") is an initialism/acronym that stands for "heating, ventilation, and air conditioning".
..... Click the link for more information.
ice resurfacer is a truck-like vehicle used to clean and smooth the surface of an ice rink, originally developed by Frank J. Zamboni in 1949. Frank J. Zamboni & Co, Inc. and other companies manufacture ice resurfacing machines, and many people colloquially refer to ice resurfacers
..... Click the link for more information.
The Electric Vehicle was an American automobile manufactured only in 1899. An electric cab, it was widely used in New York City; the company pioneered the use of pressed steel for wheels, and its cars featured front-wheel drive and brakes and rear-wheel steering.
..... Click the link for more information.
A number of vehicles use a diesel-electric powertrain for providing locomotion. A diesel-electric powerplant includes a diesel engine connected to an electrical generator, creating electricity that powers electric traction motors.
..... Click the link for more information.
For other types of "Hybrid Transportation", see .


A hybrid vehicle (HV) is a vehicle that uses two or more distinct power sources to propel the vehicle such as:

..... Click the link for more information.
A power tool is a tool powered by an electric motor, a compressed air motor, or a gasoline engine. Power tools are classified as either stationary or portable, where portable means handheld.
..... Click the link for more information.
Radio control (sometimes abbreviated R/C) is the use of radio signals to remotely control a device. The term is used frequently to refer to the control of model cars, boats, airplanes, and helicopters from a hand-held radio transmitter.
..... Click the link for more information.
scale model is a representation or copy of an object that is larger or smaller than the actual size of the object being represented. Very often the scale model is smaller than the original and used as a guide to making the object in full size.
..... Click the link for more information.
robot is a mechanical or virtual, artificial agent . It is usually an electromechanical system, which, by its appearance or movements, conveys a sense that it has intent or agency of its own.
..... Click the link for more information.
magnet is a material or object that produces a magnetic field. A "hard" or "permanent" magnet is one which stays magnetized for a long time, such as magnets often used in refrigerator doors.
..... Click the link for more information.
servomechanism, or servo, is a device used to provide control of a desired operation through the use of feedback. An example of a servomechanism is a home furnace controlled by a thermostat.

A common type of servo provides is position control.
..... Click the link for more information.
alternating current (AC) is an electrical current whose magnitude and direction vary cyclically, as opposed to direct current, whose direction remains constant. The usual waveform of an AC power circuit is a sine wave, as this results in the most efficient transmission of
..... Click the link for more information.
A variable-frequency drive (VFD) is a system for controlling the rotational speed of an alternating current (AC) electric motor by controlling the frequency of the electrical power supplied to the motor. A variable frequency drive is a specific type of adjustable-speed drive.
..... Click the link for more information.
The abbreviation DSP can refer to:

Computing

  • Digital signal processing, the study of signals in a digital representation and their processing methods

..... Click the link for more information.
Direct torque control is one method used in variable frequency drives to control the torque (and thus finally the speed) of three-phase AC electric motors. This involves calculating an estimate of the motor's magnetic flux and torque based on the measured voltage and current of the
..... Click the link for more information.
A thyristor drive is a motor drive circuit where AC supply current is regulated by a thyristor phase control to provide variable voltage to a DC motor.

Thyristor drives are very simple and were first introduced in the 1960s.
..... Click the link for more information.
SCR may refer to:

In associations, companies, institutions:
  • Senior Common Room of a higher education institution, particularly a college at Oxford or Cambridge University
  • Southern Counties Radio, the BBC Local Radio service for part of southern England.

..... Click the link for more information.
AC may refer to any of the following, broken down by subject area.

Science

  • Actinium (Ac), a chemical element
  • Acetaldehyde (also Ac), an organic ion
  • Acetate (also Ac), an organic ion

..... Click the link for more information.
Hall effect sensor is a transducer that varies its output voltage in response to changes in magnetic field. Hall sensors are used for proximity switching, positioning, speed detection, and current sensing applications.
..... Click the link for more information.
The rotor is the non-stationary part of a rotary electric motor or alternator, which rotates because the wires and magnetic field of the motor are arranged so that a torque is developed about the rotor's axis.
..... Click the link for more information.
Electromotive force (emf, ) is a term used to characterize electrical devices, such as voltaic cells, thermoelectric devices, electrical generators and transformers, and even resistors.
..... Click the link for more information.
servomechanism, or servo, is a device used to provide control of a desired operation through the use of feedback. An example of a servomechanism is a home furnace controlled by a thermostat.

A common type of servo provides is position control.
..... Click the link for more information.
Pulse-width modulation (PWM) of a signal or powersource involves the modulation of its duty cycle, to either convey information over a communications channel or control the amount of power sent to a load.
..... Click the link for more information.
A stepper motor is a brushless, synchronous electric motor that can divide a full rotation into a large number of steps, for example, 200 steps. When commutated electronically, the motor's position can be controlled precisely, without any feedback mechanism (see open loop
..... Click the link for more information.
An H-bridge is an electronic circuit which enables DC electric motors to be run forwards or backwards. These circuits are often used in robotics. H-bridges are available as integrated circuits, or can be built from separate components.
..... Click the link for more information.
An H-bridge is an electronic circuit which enables DC electric motors to be run forwards or backwards. These circuits are often used in robotics. H-bridges are available as integrated circuits, or can be built from separate components.
..... Click the link for more information.

This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.