Spacecraft propulsion is any method used to change the velocity of spacecraft and artificial satellites. There are many different methods. Each method has drawbacks and advantages, and spacecraft propulsion is an active area of research. However, most spacecraft today are propelled by exhausting a gas from the back/rear of the vehicle at very high speed through a supersonic de Laval nozzle. This sort of engine is called a rocket engine.

All current spacecraft use chemical rockets (bipropellant or solid-fuel) for launch, though some (such as the Pegasus rocket and SpaceShipOne) have used air-breathing engines on their first stage. Most satellites have simple reliable chemical rockets (often monopropellant rockets) or resistojet rockets to keep their station, although some use momentum wheels for attitude control. Newer geo-orbiting spacecraft are starting to use electric propulsion for north-south stationkeeping. Interplanetary vehicles mostly use chemical rockets as well, although a few have experimentally used ion thrusters (a form of electric propulsion) with some success.

The necessity for propulsion system

Artificial satellites must be launched into orbit, and once there they must be placed in their nominal orbit. Once in the desired orbit, they often need some form of attitude control so that they are correctly pointed with respect to the Earth, the Sun, and possibly some astronomical object of interest.^[1] They are also subject to drag from the thin atmosphere, so that to stay in orbit for a long period of time some form of propulsion is occasionally necessary to make small corrections (orbital stationkeeping).^[2] Many satellites need to be moved from one orbit to another from time to time, and this also requires propulsion.^[3] When a satellite has exhausted its ability to adjust its orbit, its useful life is over.

Spacecraft designed to travel further also need propulsion methods. They need to be launched out of the Earth's atmosphere just as satellites do. Once there, they need to leave orbit and move around.

For interplanetary travel, a spacecraft must use its engines to leave Earth orbit. Once it has done so, it must somehow make its way to its destination. Current interplanetary spacecraft do this with a series of short-term trajectory adjustments.^[4] In between these adjustments, the spacecraft simply falls freely along its orbit. The simplest fuel-efficient means to move from one circular orbit to another is with a Hohmann transfer orbit: the spacecraft begins in a roughly circular orbit around the Sun. A short period of thrust in the direction of motion accelerates or decelerates the spacecraft into an elliptical orbit around the Sun which is tangential to its previous orbit and also to the orbit of its destination. The spacecraft falls freely along this elliptical orbit until it reaches its destination, where another short period of thrust accelerates or decelerates it to match the orbit of its destination.^[5] Special methods such as aerobraking are sometimes used for this final orbital adjustment.^[6]

Some spacecraft propulsion methods such as solar sails provide very low but inexhaustible thrust;^[7] an interplanetary vehicle using one of these methods would follow a rather different trajectory, either constantly thrusting against its direction of motion in order to decrease its distance from the Sun or constantly thrusting along its direction of motion to increase its distance from the Sun.

Spacecraft for interstellar travel also need propulsion methods. No such spacecraft has yet been built, but many designs have been discussed. Since interstellar distances are very great, a tremendous velocity is needed to get a spacecraft to its destination in a reasonable amount of time. Acquiring such a velocity on launch and getting rid of it on arrival will be a formidable challenge for spacecraft designers.^[8]

Effectiveness of propulsion systems

When in space, the purpose of a propulsion system is to change the velocity, or v, of a spacecraft. Since this is more difficult for more massive spacecraft, designers generally discuss momentum, mv. The amount of change in momentum is called impulse.^[9] So the goal of a propulsion method in space is to create an impulse.

When launching a spacecraft from the Earth, a propulsion method must overcome a higher gravitational pull to provide a net positive acceleration.^[10] In orbit, the spacecraft tangential velocity provides a centrifugal acceleration that counteracts the acceleration due to gravity at a given path (which is actually the orbit path) so that any additional impulse, even very tiny, will result in a change in the orbit path.

The rate of change of velocity is called acceleration, and the rate of change of momentum is called force. To reach a given velocity, one can apply a small acceleration over a long period of time, or one can apply a large acceleration over a short time. Similarly, one can achieve a given impulse with a large force over a short time or a small force over a long time. This means that for maneuvering in space, a propulsion method that produces tiny accelerations but runs for a long time can produce the same impulse as a propulsion method that produces large accelerations for a short time. When launching from a planet, tiny accelerations cannot overcome the planet's gravitational pull and so cannot be used.

The Earth's surface is situated fairly deep in a gravity well and it takes a velocity of 11.2 kilometers/second (escape velocity) or more to escape from it. As human beings evolved in a gravitational field of 1g (9.8 m/s²), an ideal propulsion system would be one that provides a continuous acceleration of 1g (though human bodies can tolerate much larger accelerations over short periods). The occupants of a rocket or spaceship having such a propulsion system would be free from all the ill effects of free fall, such as nausea, muscular weakness, reduced sense of taste, or leaching of calcium from their bones.

The law of conservation of momentum means that in order for a propulsion method to change the momentum of a space craft it must change the momentum of something else as well. A few designs take advantage of things like magnetic fields or light pressure in order to change the spacecraft's momentum, but in free space the rocket must bring along some mass to accelerate away in order to push itself forward. Such mass is called reaction mass.

In order for a rocket to work, it needs two things: reaction mass and energy. The impulse provided by launching a particle of reaction mass having mass m at velocity v is mv. But this particle has kinetic energy mv²/2, which must come from somewhere. In a conventional solid, liquid, or hybrid rocket, the fuel is burned, providing the energy, and the reaction products are allowed to flow out the back, providing the reaction mass. In an ion thruster, electricity is used to accelerate ions out the back. Here some other source must provide the electrical energy (perhaps a solar panel or a nuclear reactor), while the ions provide the reaction mass.<ref name="beginners_guide" />

When discussing the efficiency of a propulsion system, designers often focus on effectively using the reaction mass. Reaction mass must be carried along with the rocket and is irretrievably consumed when used. One way of measuring the amount of impulse that can be obtained from a fixed amount of reaction mass is the specific impulse, the impulse per unit weight-on-Earth (typically designated by ). The unit for this value is seconds. Since the weight on Earth of the reaction mass is often unimportant when discussing vehicles in space, specific impulse can also be discussed in terms of impulse per unit mass. This alternate form of specific impulse uses the same units as velocity (e.g. m/s), and in fact it is equal to the effective exhaust velocity of the engine (typically designated ). Confusingly, both values are sometimes called specific impulse. The two values differ by a factor of g, the acceleration due to gravity on the Earth's surface ().

A rocket with a high exhaust velocity can achieve the same impulse with less reaction mass. However, the energy required for that impulse is proportional to the square of the exhaust velocity, so that more mass-efficient engines require much more energy, and are typically less energy efficient. This is a problem if the engine is to provide a large amount of thrust. To generate a large amount of impulse per second, it must use a large amount of energy per second. So highly (mass) efficient engines require enormous amounts of energy per second to produce high thrusts. As a result, most high-efficiency engine designs also provide very low thrust.

Delta-v and propellant use

Burning the entire usable propellant of a spacecraft through the engines in a straight line in free space would produce a net velocity change to the vehicle; this number is termed 'delta-v' ().

If the exhaust velocity is constant then the total of a vehicle can be calculated using the rocket equation, where M is the mass of fuel (or rather the mass of propellant), P is the mass of the payload (including the rocket structure), and is the velocity of the rocket exhaust. This is known as the Tsiolkovsky rocket equation:

For historical reasons, as discussed above, is sometimes written as

where is the specific impulse of the rocket, measured in seconds, and is the gravitational acceleration at sea level.

For a high delta-v mission, the majority of the spacecraft's mass needs to be reaction mass. Since a rocket must carry all of its reaction mass, most of the initially-expended reaction mass goes towards accelerating reaction mass rather than payload. If the rocket has a payload of mass P, the spacecraft needs to change its velocity by , and the rocket engine has exhaust velocity v_e, then the mass M of reaction mass which is needed can be calculated using the rocket equation and the formula for :

For much smaller than v_e, this equation is roughly linear, and little reaction mass is needed. If is comparable to v_e, then there needs to be about twice as much fuel as combined payload and structure (which includes engines, fuel tanks, and so on). Beyond this, the growth is exponential; speeds much higher than the exhaust velocity require very high ratios of fuel mass to payload and structural mass.

Energy use

Some energy must go into accelerating the reaction mass. Every engine will waste some energy, but even assuming 100% efficiency, the engine will need energy amounting to

Comparing the rocket equation (which shows how much energy ends up in the final vehicle) and the above equation (which shows the total energy required) shows that even with 100% engine efficiency, certainly not all energy supplied ends up in the vehicle - some of it, indeed usually most of it, ends up as kinetic energy of the exhaust.

Interestingly, if the is fixed, for a mission delta-v, there is a particular that minimises the overall energy used by the rocket. This comes to an exhaust velocity of about ⅔ of the mission delta-v (see the energy computed from the rocket equation). Drives with a specific impulse that is both high and fixed such as Ion thrusters have exhaust velocities that can be enormously higher than this ideal, and thus end up powersource limited and give very low thrust. Where the vehicle performance is power limited, e.g. if solar power or nuclear power is used, then in the case of a large the maximum acceleration is inversely proportional to it. Hence the time to reach a required delta-v is proportional to . Thus the latter should not be too large.

On the other hand if the exhaust velocity can be made to vary so that at each instant it is equal and opposite to the vehicle velocity then the absolute minimum energy usage is achieved. When this is achieved, the exhaust stops in space ^|  and has no kinetic energy; and all the energy ends up in the vehicle (in principle such a drive would be 100% efficient, in practice there would be thermal losses from within the drive system and residual heat in the exhaust). However in most cases this uses an impractical quantity of propellant, but is a useful theoretical consideration.

Some drives (such as VASIMR or Electrodeless plasma thruster ) actually can significantly vary their exhaust velocity. This can help reduce propellant usage and improve acceleration at different stages of the flight. However the best energetic performance and acceleration is still obtained when the exhaust velocity is close to the vehicle speed. Proposed ion and plasma drives usually have exhaust velocities enormously higher than that ideal (in the case of VASIMR the lowest quoted speed is around 15000 m/s compared to a mission delta-v from high Earth orbit to Mars of about 4000m/s).

For a mission, for example, when launching from or landing on a planet, the effects of gravitational attraction and any atmospheric drag must be overcome by using fuel. It is typical to combine the effects of these and other effects into an effective mission delta-v. For example a launch mission to low Earth orbit requires about 9.3-10 km/s delta-v. These mission delta-vs are typically numerically integrated on a computer.

Example

Suppose we want to send a 10,000 kg space probe to Mars. The required from LEO is approximately 3000 m/s, using a Hohmann transfer orbit. (A manned probe would need to take a faster route and use more fuel). For the sake of argument, let us say that the following thrusters may be used:

Engine	Effective Exhaust Velocity (m/s)	Specific impulse (s)	Fuel mass (kg)	Energy required (GJ)	Energy per kg of propellant	minimum power per N of thrust
Solid rocket	1,000	100	190,000	95	500 kJ	0.5 kW
Bipropellant rocket	5,000	500	8,200	103	12.6 MJ	2.5 kW
Ion thruster	50,000	5,000	620	775	1.25 GJ	25 kW

Observe that the more fuel-efficient engines can use far less fuel; its mass is almost negligible (relative to the mass of the payload and the engine itself) for some of the engines. However, note also that these require a large total amount of energy. For earth launch engines require a thrust to weight ratio of much more than unity. To do this they would have to be supplied with Gigawatts of power — equivalent to a major metropolitan generating station. This would need to be carried on the vehicle, which is clearly impractical.

Instead, a much smaller, less powerful generator may be included which will take much longer to generate the total energy needed. This lower power is only sufficient to accelerate a tiny amount of fuel per second, but over long periods the velocity will be finally achieved. For example. it took the Smart 1 more than a year to reach the Moon, while with a chemical rocket it takes a few days. Because the ion drive needs much less fuel, the total launched mass is usually lower, which typically results in a lower overall cost.

Mission planning frequently involves adjusting and choosing the propulsion system according to the mission delta-v needs, so as to minimise the total cost of the project, including trading off greater or lesser use of fuel and launch costs of the complete vehicle.

Propulsion methods

Propulsion methods can be classified based on their means of accelerating the reaction mass. There are also some special methods for launches, planetary arrivals, and landings.

Rocket engines

Main article: Rocket engine

Most rocket engines are internal combustion heat engines (although non combusting forms exist). Rocket engines generally produce a high temperature reaction mass, as a hot gas. This is achieved by combusting a solid, liquid or gaseous fuel with an oxidiser within a combustion chamber. The extremely hot gas is then allowed to escape through a high-expansion ratio nozzle. This bell-shaped nozzle is what gives a rocket engine its characteristic shape. The effect of the nozzle is to dramatically accelerate the mass, converting most of the thermal energy into kinetic energy. Exhaust speeds as high as 10 times the speed of sound at sea level are common.

Rockets emitting plasma can potentially carry out reactions inside a magnetic bottle and release the plasma via a magnetic nozzle, so that no solid matter need come in contact with the plasma. Of course, the machinery to do this is complex, but research into nuclear fusion has developed methods, some of which have been used in speculative propulsion systems.

See rocket engine for a listing of various kinds of rocket engines using different heating methods, including chemical, electrical, solar, and nuclear.

Electromagnetic acceleration of reaction mass

Rather than relying on high temperature and fluid dynamics to accelerate the reaction mass to high speeds, there are a variety of methods that use electrostatic or electromagnetic forces to accelerate the reaction mass directly. Usually the reaction mass is a stream of ions. Such an engine very typically uses electric power, first to ionise atoms, and then uses a voltage gradient to accelerate the ions to high exhaust velocities.

For these drives, at the highest exhaust speeds energetic efficiency and thrust are all inversely proportional to exhaust velocity. Their very high exhaust velocity means they require huge amounts of energy and thus with practical power sources provide low thrust, but use hardly any fuel.

For some missions, particularly reasonably close to the Sun, solar energy may be sufficient, and has very often been used, but for others further out or at higher power, nuclear energy is necessary; engines drawing their power from a nuclear source are called nuclear electric rockets.

With any current source of electrical power, chemical, nuclear or solar, the maximum amount of power that can be generated limits the amount of thrust that can be produced to a small value. Power generation adds significant mass to the spacecraft, and ultimately the weight of the power source limits the performance of the vehicle.

Current nuclear power generators are approximately half the weight of solar panels per watt of energy supplied, at terrestrial distances from the Sun. Chemical power generators are not used due to the far lower total available energy. Beamed power to the spacecraft shows some potential. However, the dissipation of waste heat from any power plant may make any propulsion system requiring a separate power source infeasible for interstellar travel.

Some electromagnetic methods:

• Ion thrusters (accelerate ions first and later neutralize the ion beam with an electron stream emitted from a cathode called a neutralizer)
• Electrostatic ion thruster
• Field Emission Electric Propulsion
• Hall effect thruster
• Colloid thruster
• Plasma thrusters (where both ions and electrons are accelerated simultaneously, no neutralizer is required)
• Magnetoplasmadynamic thruster
• Helicon Double Layer Thruster
• Electrodeless plasma thruster
• Pulsed inductive thruster
• Variable specific impulse magnetoplasma rocket (VASIMR)
• Mass drivers (for propulsion)

Systems without reaction mass carried within the spacecraft

The law of conservation of momentum states that any engine which uses no reaction mass cannot move the center of mass of a spaceship (changing orientation, on the other hand, is possible). But space is not empty, especially space inside the Solar System; there are gravitation fields, magnetic fields, solar wind and solar radiation. Various propulsion methods try to take advantage of these. However, since these phenomena are diffuse in nature, corresponding propulsion structures need to be proportionately large.

There are several different space drives that need little or no reaction mass to function. A tether propulsion system employs a long cable with a high tensile strength to change a spacecraft's orbit, such as by interaction with a planet's magnetic field or through momentum exchange with another object.^[11] Solar sails rely on radiation pressure from electromagnetic energy, but they require a large collection surface to function effectively. The magnetic sail deflects charged particles from the solar wind with a magnetic field, thereby imparting momentum to the spacecraft. A variant is the mini-magnetospheric plasma propulsion system, which uses a small cloud of plasma held in a magnetic field to deflect the Sun's charged particles.

For changing the orientation of a satellite or other space vehicle, conservation of angular momentum does not pose a similar constraint. Thus many satellites use momentum wheels to control their orientations. These cannot be the only system for controlling satellite orientation, as the angular momentum built up due to torques from external forces such as solar, magnetic or tidal forces eventually needs to be "bled off" using a secondary system.

Gravitational slingshots can also be used to carry a probe onward to other destinations.

Launch mechanisms

High thrust is of vital importance for Earth launch, thrust has to be greater than weight (see also gravity drag). Many of the propulsion methods above give a thrust/weight ratio of much less than 1, and so cannot be used for launch.

All current spacecraft use chemical rocket engines (bipropellant or solid-fuel) for launch. Other power sources such as nuclear have been proposed, and tested, but safety, environmental and political considerations have so far curtailed their use.

One advantage that spacecraft have in launch is the availability of infrastructure on the ground to assist them. Proposed ground-assisted launch mechanisms include:

• Space elevator
• Orbital airship
• Space fountain
• Hypersonic skyhook
• Electromagnetic catapult (railgun, coilgun)
• Space gun (Project HARP, ram accelerator)
• Laser propulsion (Lightcraft)

Airbreathing engines for launch

Main article: Jet engine

Studies generally show that conventional air-breathing engines, such as ramjets or turbojets are basically too heavy (have too low a thrust/weight ratio) to give any significant performance improvement when installed on a launch vehicle itself. However, launch vehicles can be air launched from separate lift vehicles (e.g. B-29, Pegasus Rocket and White Knight) which do use such propulsion systems.

On the other hand, very lightweight or very high speed engines have been proposed that take advantage of the air during ascent:

• SABRE - a lightweight hydrogen fuelled turbojet with precooler^[12]
• ATREX - a lightweight hydrogen fuelled turbojet with precooler^[13]
• Liquid air cycle engine - a hydrogen fuelled jet engine that liquifies the air before burning it in a rocket engine
• Scramjet - jet engines that use supersonic combustion

Normal rocket launch vehicles fly almost vertically before rolling over at an altitude of some tens of kilometers before burning sideways for orbit; this initial vertical climb wastes propellant but is optimal as it greatly reduces airdrag. Airbreathing engines burn propellant much more efficiently and this would permit a far flatter launch trajectory, the vehicles would typically fly approximately tangentially to the earth surface until leaving the atmosphere then perform a rocket burn to bridge the final delta-v to orbital velocity.

Planetary arrival and landing

When a vehicle is to enter orbit around its destination planet, or when it is to land, it must adjust its velocity. This can be done using all the methods listed above (provided they can generate a high enough thrust), but there are a few methods that can take advantage of planetary atmospheres and/or surfaces.

• Aerobraking allows a spacecraft to reduce the high point of an elliptical orbit by repeated brushes with the atmosphere at the low point of the orbit. This can save a considerable amount of fuel since it takes much less delta-V to enter an elliptical orbit compared to a low circular orbit. Since the braking is done over the course of many orbits, heating is comparatively minor, and a heat shield is not required. This has been done on several Mars missions such as Mars Global Surveyor, Mars Odyssey and Mars Reconnaissance Orbiter, and at least one Venus mission, Magellan.
• Aerocapture is a much more aggressive manoeuver, converting an incoming hyperbolic orbit to an elliptical orbit in one pass. This requires a heat shield and much trickier navigation, since it must be completed in one pass through the atmosphere, and unlike aerobraking no preview of the atmosphere is possible. If the intent is to remain in orbit, then at least one more propulsive maneuver is required after aerocapture—otherwise the low point of the resulting orbit will remain in the atmosphere, resulting in eventual re-entry. Aerocapture has not yet been tried on a planetary mission, but the re-entry skip by Zond 6 and Zond 7 upon lunar return were aerocapture maneuvers, since they turned a hyperbolic orbit into an elliptical orbit. On these missions, since there was no attempt to raise the perigee after the aerocapture, the resulting orbit still intersected the atmosphere, and re-entry occurred at the next perigee.
• Parachutes can land a probe on a planet with an atmosphere, usually after the atmosphere has scrubbed off most of the velocity, using a heat shield.
• Airbags can soften the final landing.
• Lithobraking, or stopping by simply smashing into the target, is usually done by accident. However, it may be done deliberately with the probe expected to survive (see, for example, Deep Space 2). Very sturdy probes and low approach velocities are required.

Proposed methods that may violate the laws of physics

In addition, a variety of hypothetical propulsion techniques have been considered that would require entirely new principles of physics to realize and that may not actually be possible. To date, such methods are highly speculative and include:

• Diametric drive
• Pitch drive
• Bias drive
• Disjunction drive
• Alcubierre drive (a form of Warp drive)
• Differential sail
• Wormholes - theoretically possible, but impossible in practice with current technology
• Antigravity - requires the concept of antigravity; theoretically impossible
• Reactionless drives - breaks the law of conservation of momentum; theoretically impossible
• EmDrive - again, breaks the law of conservation of momentum; theoretically impossible
• A "hyperspace" drive based upon Heim theory

Table of methods and their specific impulse

Below is a summary of some of the more popular, proven technologies, followed by increasingly speculative methods.

Four numbers are shown. The first is the effective exhaust velocity: the equivalent speed that the propellant leaves the vehicle. This is not necessarily the most important characteristic of the propulsion method, thrust and power consumption and other factors can be, however:

• if the delta-v is much more than the exhaust velocity, then exorbitant amounts of fuel are necessary (see the section on calculations, above)
• if it is much more than the delta-v, then, proportionally more energy is needed; if the power is limited, as with solar energy, this means that the journey takes a proportionally longer time

The second and third are the typical amounts of thrust and the typical burn times of the method. Outside a gravitational potential small amounts of thrust applied over a long period will give the same effect as large amounts of thrust over a short period. (This result does not apply when the object is significantly influenced by gravity.)

The fourth is the maximum delta-v this technique can give (without staging). For rocket-like propulsion systems this is a function of mass fraction and exhaust velocity. Mass fraction for rocket-like systems is usually limited by propulsion system weight and tankage weight. For a system to achieve this limit, typically the payload may need to be a negligible percentage of the vehicle, and so the practical limit on some systems can be much lower.

Propulsion methods

Method	Effective Exhaust Velocity (m/s)	Thrust (N)	Firing Duration	Maximum Delta-v (km/s)
Propulsion methods in current use
Solid rocket	1,000 - 4,000	10³ - 107	minutes	~ 7
Hybrid rocket	1,500 - 4,200	<0.1 - 107	minutes	> 3
Monopropellant rocket	1,000 - 3,000	0.1 - 100	milliseconds - minutes	~ 3
Bipropellant rocket	1,000 - 4,700	0.1 - 107	minutes	~ 9
Tripropellant rocket	2,500 - 4,500		minutes	~ 9
Resistojet rocket	2,000 - 6,000	10-2 - 10	minutes
Arcjet rocket	4,000 - 12,000	10-2 - 10	minutes
Hall effect thruster (HET)	8,000 - 50,000	10-3 - 10	months/years	> 100
Electrostatic ion thruster	15,000 - 80,000	10-3 - 10	months/years	> 100
Field Emission Electric Propulsion (FEEP)	100,000 - 130,000	10-6 - 10-3	weeks
Magnetoplasmadynamic thruster (MPD)	20,000 - 100,000	100	weeks
Pulsed plasma thruster (PPT)	~ 20,000	~ 0.1	~ 2,000 - ~ 10,000 hours
Pulsed inductive thruster (PIT)	50,000	20	months
Nuclear electric rocket	As electric propulsion method used
Currently feasible propulsion methods
Solar sails	N/A	9 per km² (at 1 AU)	Indefinite	> 40
Tether propulsion	N/A	1 - 1012	minutes	~ 7
Mass drivers (for propulsion)	30,000 - ?	104 - 108	months
Orion Project (Near term nuclear pulse propulsion)	20,000 - 100,000	109 - 1012	several days	~30-60
Variable specific impulse magnetoplasma rocket (VASIMR)	10,000 - 300,000	40 - 1,200	days - months	> 100
Nuclear thermal rocket	9,000	105	minutes	> ~ 20
Solar thermal rocket	7,000 - 12,000	1 - 100	weeks	> ~ 20
Radioisotope rocket	7,000-8,000		months
Air-augmented rocket	5,000 - 6,000	0.1 - 107	seconds-minutes	> 7?
Liquid air cycle engine	4,500	1000 - 107	seconds-minutes	?
SABRE	30,000/4,500	0.1 - 107	minutes	9.4
Dual mode propulsion rocket
Technologies requiring further research
Magnetic sails	N/A	Indefinite	Indefinite
Mini-magnetospheric plasma propulsion	200,000	~1 N/kW	months
Nuclear pulse propulsion (Project Daedalus' drive)	20,000 - 1,000,000	109 - 1012	years	~15,000
Gas core reactor rocket	10,000 - 20,000	10³ - 106
Nuclear salt-water rocket	100,000	10³ - 107	half hour
Beam-powered propulsion	As propulsion method powered by beam
Fission sail
Fission-fragment rocket	1,000,000
Nuclear photonic rocket	300,000,000	10-5 - 1	years-decades
Fusion rocket	100,000 - 1,000,000
Space Elevator	N/A	N/A	Indefinite	> 12
Significantly beyond current engineering
Antimatter catalyzed nuclear pulse propulsion	200,000 - 4,000,000		days-weeks
Antimatter rocket	10,000,000 - 100,000,000
Bussard ramjet	2,240,623 - 20,000,000		indefinite	~30,000
Gravitoelectromagnetic toroidal launchers				<300,000

See also

• interplanetary travel
• interstellar travel
• List of aerospace engineering topics
• specific impulse
• rocket
• rocket engine nozzles
• Tsiolkovsky rocket equation
• satellite
• Solar sail
• Magnetic sail
• Orbital mechanics

Notes

1. ^  With things moving around in orbits and nothing staying still, the question may be quite reasonably asked, stationary relative to what? The answer is for the energy to be zero (and in the absence of gravity which complicates the issue somewhat), the exhaust must stop relative to the initial motion of the rocket before the engines were switched on. It is possible to do calculations from other reference frames, but consideration for the kinetic energy of the exhaust and propellant needs to be given. In Newtonian mechanics the initial position of the rocket is the centre of mass frame for the rocket/propellant/exhaust, and has the minimum energy of any frame.

References

External links

• NASA Beginner's Guide to Propulsion
• NASA Breakthrough Propulsion Physics project
• Rocket Propulsion
• Journal of Advanced Theoretical Propulsion
• Different Rockets
• Earth-to-Orbit Transportation Bibliography
• Spaceflight Propulsion - a detailed survey by Greg Goebel, in the public domain
• Rocket motors on howstuffworks.com