# ideal gas

An ideal gas or perfect gas is a hypothetical gas consisting of identical particles of zero volume, with no intermolecular forces. Additionally, the constituent atoms or molecules undergo perfectly elastic collisions with the walls of the container. Real gases do not exhibit these exact properties, although the approximation is often good enough to describe real gases. Gases are most ideal at high temperatures and low densities.

## Types of ideal gases

There exist three basic types of ideal gas:
The classical ideal gas can be separated into two types: The classical thermodynamic ideal gas and the ideal quantum Boltzmann gas. Both are essentially the same, except that the classical thermodyamic ideal gas is based on classical thermodynamics alone, and certain thermodynamic parameters such as the entropy are only specified to within an undetermined additive constant. The ideal quantum Boltzmann gas overcomes this limitation by taking the limit of the quantum Bose gas and quantum Fermi gas in the limit of high temperature to specify these additive constants. The behavior of a quantum Boltzmann gas is the same as that of a classical ideal gas except for the specification of these constants. The results of the quantum Boltzmann gas are used in a number of cases including the Sackur-Tetrode equation for the entropy of an ideal gas and the Saha ionization equation for a weakly ionized plasma.

## Classical thermodynamic ideal gas

The thermodynamic properties of an ideal gas can be described by two equations: The equation of state of a classical ideal gas is given by the ideal gas law.

The internal energy of an ideal gas is given by:

where:
* is a constant (e.g. equal to 3/2 for a monatomic gas)
* U is internal energy
* p is the pressure
* V is the volume
* n is the amount of gas (moles)
* R is the gas constant, 8.314JK-1mol-1
* T is the absolute temperature
* N is the number of particles
* k is the Boltzmann constant, 1.381x10-23J•K-1

The probability distribution of particles by velocity or energy is given by the Boltzmann distribution.

The ideal gas law is an extension of experimentally discovered gas laws. Real fluids at low density and high temperature, approximate the behavior of a classical ideal gas. However, at lower temperatures or a higher density, a real fluid deviates strongly from the behavior of an ideal gas, particularly as it condenses from a gas into a liquid or solid.

## Heat capacity

The heat capacity at constant volume of an ideal gas is:

It is seen that the constant is just the dimensionless specific heat capacity at constant volume. It is equal to half the number of degrees of freedom per particle. For a monatomic gas this is just while for a diatomic gas it is . It is seen that macroscopic measurements on heat capacity provide information on the microscopic structure of the molecules.

The heat capacity at constant pressure of an ideal gas is:

where is the enthalpy of the gas. It is seen that is also a constant and that the dimensionless heat capacities are related by:

## Entropy

Using the results of thermodynamics only, we can go a long way in determining the expression for the entropy of an ideal gas. This is an important step since, according to the theory of thermodynamic potentials, of which the internal energy U is one, if we can express the entropy as a function of U and the volume V, then we will have a complete statement of the thermodynamic behavior of the ideal gas. We will be able to derive both the ideal gas law and the expression for internal energy from it.

Since the entropy is an exact differential, using the chain rule, the change in entropy when going from a reference state 0 to some other state with entropy S may be written as where:

where the reference variables may be functions of the number of particles N. Using the definition of the heat capacity at constant volume for the first differential and the appropriate Maxwell relation for the second we have:

Expressing in terms of as developed in the above section, differentiating the ideal gas equation of state, and integrating yields:

where all constants have been incorporated into the logarithm as f(N) which is some function of the particle number N having the same dimensions as in order that the argument of the logarithm be dimensionless. We now impose the constraint that the entropy be extensive. This will mean that when the extensive parameters (V and N) are multiplied by a constant, the entropy will be multiplied by the same constant. Mathematically:

From this we find an equation for the function f(N)

Differentiating this with respect to a, setting a equal to unity, and then solving the differential equation yields f(N):

where φ is some constant with the dimensions of . Substituting into the equation for the change in entropy:

This is about as far as we can go using thermodynamics alone. Note that the above equation is flawed—as the temperature approaches zero, the entropy approaches negative infinity, in contradiction to the third law of thermodynamics. In the above "ideal" development, there is a critical point, not at absolute zero, at which the argument of the logarithm becomes unity, and the entropy becomes zero. This is unphysical. The above equation is a good approximation only when the argument of the logarithm is much larger than unity—the concept of an ideal gas breaks down at low values of V/N. Nevertheless, there will be a "best" value of the constant in the sense that the predicted entropy is as close as possible to the actual entropy, given the flawed assumption of ideality. It remained for quantum mechanics to introduce a reasonable value for the value of φ which yields the Sackur-Tetrode equation for the entropy of an ideal gas. It too suffers from a divergent entropy at absolute zero, but is a good approximation to an ideal gas over a large range of densities.

## Thermodynamic potentials

Since the dimensionless heat capacity at constant pressure is a constant we can express the entropy in what will prove to be a more convenient form:

where Φ is now the undetermined constant. The chemical potential of the ideal gas is calculated from the corresponding equation of state (see thermodynamic potential):

where G is the Gibbs free energy and is equal to so that:

The thermodynamic potentials for an ideal gas can now be written as functions of T, V, and N as:

The most informative way of writing the potentials is in terms of their natural variables, since each of these equations can be used to derive all of the other thermodynamic variables of the system. In terms of their natural variables, the thermodynamic potentials of a single-specie ideal gas are:

### Multicomponent systems

By Gibbs theorem, the entropy of a multicomponent system is equal to the sum of the entropies of each chemical species (assuming no surface effects). The entropy of a multicomponent system will be:

where the sum is over all species. Likewise, the free energies are equal to the sums of the free energies of each species so that if Φ is a thermodynamic potential then

where Φj is expressed in terms of its natural variables. For example, the internal energy will be:

where N is defined as

.

## Speed of sound

Main article: Speed of sound
The speed of sound in an ideal gas is given by
where
is the universal gas constant
is the temperature
is the molar mass for the gas (in kg/mol)

### Equation Table for an Ideal Gas ()

The following table gives the values for the change in the value of some thermodynamic variables under the specified transformation.

 Variable Constant Pressure (Isobaric) Constant Volume (Isochoric) Isothermal Adiabatic Work, Heat Capacity, or or Internal Energy, Enthalpy, Entropy,

## Ideal quantum gases

In the above mentioned Sackur-Tetrode equation, the best choice of the entropy constant was found to be proportional to the quantum thermal wavelength of a particle, and the point at which the argument of the logarithm becomes zero is roughly equal to the point at which the average distance between particles becomes equal to the thermal wavelength. In fact, quantum theory itself predicts the same thing. Any gas behaves as an ideal gas at high enough temperature and low enough density, but at the point where the Sackur-Tetrode equation begins to break down, the gas will begin to behave as a quantum gas, composed of either bosons or fermions. (See the gas in a box article for a derivation of the ideal quantum gases, including the ideal Boltzmann gas.)

### Ideal Boltzmann gas

The ideal Boltzmann gas yields the same results as the classical thermodynamic gas, but makes the following identification for the undetermined constant Φ:

where Λ is the thermal de Broglie wavelength of the gas and g is the degeneracy of states.

### Ideal Bose and Fermi gases

An ideal gas of bosons (e.g. a photon gas) will be governed by Bose-Einstein statistics and the distribution of energy will be in the form of a Bose-Einstein distribution. An ideal gas of fermions will be governed by Fermi-Dirac statistics and the distribution of energy will be in the form of a Fermi-Dirac distribution.

Gas is one of the four major states of matter, consisting of freely moving atoms or molecules without a definite shape. Compared to the solid and liquid states of matter a gas has lower density and a lower viscosity.
In physics, chemistry, and biology, intermolecular forces are forces that act between stable molecules or between functional groups of macromolecules. These non-covalent forces, which give rise to bonding energies of less than a few kcal/mol, are generally much weaker than the
atom (Greek ἄτομος or Ã¡tomos meaning "indivisible") is the smallest particle still characterizing a chemical element.
molecule is defined as a sufficiently stable electrically neutral group of at least two atoms in a definite arrangement held together by strong chemical bonds.[1][2] In organic chemistry and biochemistry, the term molecule
elastic collision is a collision in which the total kinetic energy of the colliding bodies after collision is equal to their total kinetic energy before collision. Elastic collisions occur only if there is no conversion of kinetic energy into other forms.
An ideal Bose gas is a quantum-mechanical version of a classical ideal gas. It is composed of bosons, which have an integral value of spin, and obey Bose-Einstein statistics.
In particle physics, bosons are force carrier particles, such as the photon. They may be either elementary or composite. They are distinguished from fermions (matter particles) by their integer spin. Bosons are named after Indian physicist Satyendra Nath Bose.
A Fermi gas, or Free electron gas, is a collection of non-interacting fermions. It is the quantum mechanical version of an ideal gas, for the case of fermionic particles.
In particle physics, fermions are particles with half-integer spin, such as protons and electrons. They are named after Enrico Fermi. In the Standard Model there are two types of elementary fermions: quarks and leptons.
Thermodynamics (from the Greek θερμη, therme, meaning "heat" and δυναμις, dynamis, meaning "power") is a branch of physics that studies the effects of changes in temperature, pressure, and volume on
The Saha ionization equation, also known as the Saha-Langmuir equation, was developed by the Indian astrophysicist Megh Nad Saha in 1920, and later (1923) by Irving Langmuir.
plasma is typically an ionized gas. Plasma is considered to be a distinct state of matter, apart from gases, because of its unique properties. "Ionized" refers to presence of one or more free electrons, which are not bound to an atom or molecule.
equation of state is a relation between state variables.<ref name="Perrot" >Perrot, Pierre (1998). A to Z of Thermodynamics. Oxford University Press. ISBN 0-19-856552-6.
The ideal gas law is the equation of state of a hypothetical ideal gas, first stated by BenoÃ®t Paul Ã‰mile Clapeyron in 1834.

The state of an amount of gas is determined by its pressure, volume, and temperature according to the equation:

In thermodynamics, the internal energy of a thermodynamic system, or a body with well-defined boundaries, denoted by U, or sometimes E, is the total of the kinetic energy due to the motion of molecules (translational, rotational, vibrational) and
In thermodynamics, the internal energy of a thermodynamic system, or a body with well-defined boundaries, denoted by U, or sometimes E, is the total of the kinetic energy due to the motion of molecules (translational, rotational, vibrational) and
The gas constant (also known as the universal or ideal gas constant, usually denoted by symbol R) is a physical constant used in equations of state to relate various groups of state functions to one another.
The joule (IPA: [dʒuːl] or [dʒaʊl]) (symbol: J) is the SI unit of energy.
The kelvin (symbol: K) is a unit increment of temperature and is one of the seven SI base units. The Kelvin scale is a thermodynamic (absolute) temperature scale where absolute zero — the coldest possible temperature — is zero kelvins
The mole (symbol: mol) is the SI base unit that measures an amount of substance. One mole contains Avogadro's number (approximately 6.0221023) entities.

A mole is much like "a dozen" in that both are absolute numbers (having no units) and can describe any type of
Thermodynamic temperature is the absolute measure of temperature and is one of the principal parameters of thermodynamics. Thermodynamic temperature is an “absolute” scale because it is the measure of the fundamental property underlying temperature: its null
The Boltzmann constant (k or kB) is the physical constant relating temperature to energy.

It is named after the Austrian physicist Ludwig Boltzmann, who made important contributions to the theory of statistical mechanics, in which this
Boltzmann distribution predicts the distribution function for the fractional number of particles Ni / N occupying a set of states i which each respectively possess energy Ei:

The gas laws are a set of laws that describe the relationship between thermodynamic temperature (T), pressure (P) and volume (V) of gases. They are a loose collection of rules developed between the late Renaissance and early 19th century.
In physics, density is mass m per unit volume V—how heavy something is compared to its size. A small, heavy object, such as a rock or a lump of lead, is denser than a lighter object of the same size or a larger object of the same weight, such as pieces of
trillion fold).]]

Temperature is a physical property of a system that underlies the common notions of hot and cold; something that is hotter generally has the greater temperature. Temperature is one of the principal parameters of thermodynamics.
trillion fold).]]

Temperature is a physical property of a system that underlies the common notions of hot and cold; something that is hotter generally has the greater temperature. Temperature is one of the principal parameters of thermodynamics.